Feeds:
Posts
Comments

Posts Tagged ‘pallet wood’

Nellie's Barn Sale!There’s SO much going on and I need to be VERY mindful of my two looming show deadlines!

Trying to be the most efficient, I thought it might be prudent to work out the construction of a few things at once, then go back to paint/finish.
Do you guys ever do that?

Vintage Market at the Vineyard!

I’m really looking forward to both of these phenomenal shows!  If you’re in the Midwest and can go

they are SO worthwhile!

Here’s an old farm table frame that I’m REworking into a desk!

the old farm table~ now a desk!

I used an unusually nice pallet for the wood.  The boards happened to be the perfect size for this desk project!  I ripped one of the boards to create an apron and support cleats, and then lay out the new top.

It sanded up beautifully, I used natural oak stain on it, then poly’d the top with 2 coats.  I also added wheels to boost the height.  LUV IT!

*The “holes” you see are evidence of this old table having dropped leaves.  Each side would have had a pivoting brace to hold up the leaf.  I added guides across the span to support a shallow drawer—that will be a through-and-through to either side.
the old farm table~ now a desk!

. . . a n d  there’s a really cool shelf to show you next!

Catherine

Advertisements

Read Full Post »

the Looooong tableNot that I forgot about the exaggeratedly long table I built last fall for Nellie’s Barn Sale,

5ft long × 9½ inches deep

but I just so happened to run into the couple that bought it over the weekend.

Huh~ I still have the other pair of legs. . . and I happened on some pallet boards at an unusual 5ft 8 inches in length!  It’s the same spot I found the 2″ thick pallet used for the industrial-barn chic coat rack (also built for Nellie’s Barn sale) last fall.  I’ve been stalking that place ever since!
Since I’m no “Tom Brady” fan, I decided to forgo the super bowl and head out to my studio to work create instead!

not JUST thinking outside the box!

Last fall,

someone was offering a dining table & chairs for FREE on Craigslist.  Uh, hello~I’m on my way!

I had no interest in the WHOLE—I saw PARTS!  *Although I did do a REglue & REvamp to sell the chairs immediately.
I knocked down the table into PARTS to make it easier to store.  But I used 2 of the 4 corner double legs right away.  Paired with some awesome free barn board, I made the first  looooong skinny table you see pictured above.

So, running into the folks who bought it got me thinking again.  Fast, easy, FUN project!

freebie dining table & chairs off Craiglslist~ PARTS!

~my overflow pile!

 

 

 

 

 

 

 

 

 

 

That’s my little overflow wood pile!

So I grabbed one of those really long pallets and knocked it down to individual boards, ripped what I needed to width and cut them to length.  This time though, I rounded the ends to match the legs.  It spans a long  5’4” × 10″.

I drilled for pocket screws to secure the legs to the table top, then was able to figure the angles to add the aprons.  I shot nails in from the top to secure the aprons~with extra supports.  A N D, you see I painted.

making the Loooooong table

making the Loooooong table

making the Loooooong table~ the routered detail

Here, you can see the few separate parts needed to bring it all together.

And you can see the bead detail I routered into the aprons trying to match the same apron/leg detail.

Yes~ I painted the table.

Farrow & Ball  Rectory Red #217

I have no passion for red, but I used this at Christmas and found I really liked it.  And I actually really like it for this table!

I’m just not happy with the top.  Yet.  But I’ll figure it out.

Behind a sofa, down a hallway, in a foyer, at the foot of a bed with a bench. . . just something for fun!

Catherine

And now it goes to the antique mall for sale~

~close up of the loooooong table

~used as a sofa table here

~used as a sofa table here

Read Full Post »