Feeds:
Posts
Comments

Posts Tagged ‘matelasse fabrics’

French country ladder back chairsDo you remember the 4

french ladder back chairs

I REfinished and upholstered last spring?  No?

Yeah–I dropped the ball on sharing this to completion.  Sorry.

Here’s the READER’S DIGEST version to catch you up!

Judy’s had these chairs for-EVER. . . and they were showing it.  We probably talked about this project for a year before doing it.

The rush seats were just disintegrating and those plaid seat pads became a band-aide.

Judy's ladder back chairsI took them to the strippers.
And I wish I had let them do the whole strip & refinish—it was such a MAJOR amount of work.  But -I- painstakingly sanded all of them.  HOURS of sanding and aching hands.  Sometimes DIY sucks.

Judy's ladder back chairs

Only waxing maintained the raw, pale wood we wanted—but it wasn’t enough durability for Judy.  But you can see below that even a simple clear-coat darkened the Cherry wood.  Bummer.

sanded & clear coated

The chairs sat kind of low so we played with varying ways to REbuild the seats—deciding on furniture webbing with a thicker pad for loft AND softness.

Matelassé was ordered–from Italy!  We ordered enough for a boxed covering, but discovered the chair construction dictated wrapping the seats instead—and that took much less fabric.  So the extra matelassé was used to also cover the 2 pressed back chairs I recently shared with you.

Judy's UPHOLSTERY

*We also tackled REfinishing the Bird’s eye maple table.

You know~I’ve always been pretty efficient with my cuts  -wood, fabric, whatever-  but even I was surprised at how far I stretched this yardage!

So I’m making chair seat slip covers from the very last of the fabric!

chair seat slip covers

I’ll leave you here for the moment,

I’m still working on them.

There’s a twist to reveal at the end~so check back!

Catherine

Read Full Post »

Back in early December I was asked to REwork a pair of mismatched antique pressed back chairs *The link tells how they are created!

mismatched PRESSED BACK chairs

The darker actually has a mate (and may get worked on later),

the lighter chair came from the Ottillia Catherine estate sale I ran last spring.  Judy snatched it up before anyone else saw it—ahh those rope spindles ♥ ♥ ♥ !

They would be needed for extra seating at Christmas.  So the lighter went to the strippers for sake of time–AND because  It.  Needed.  WORK.

While the guys showered it with their expertise, I REworked the darker.  It lived by/in a South-facing window and was dry and sun faded.  A light sanding and over-staining brought it back, and I played with varying stains to match the seat.

Both chairs had the telltale evidence of original caning.  After talking it all out, caning WILL probably happen down the line, but for now, I’d cut wood for upholstered seats.  I used the caning holes to attach the seats -but very carefully- so not to damage anything for the later project.

mismatched PRESSED BACK chairs

I made seat patterns with heavy card stock paper, reduced the size a little, then used it to cut the wood seats and padding.  Both seats were covered with the incredible matelasse that was ordered from Italy for Judy’s french ladder back chairs *I can’t remember if I showed you those at the end…??

Here they are, just before REdelivery.   Plus that mirror you see behind them—which is another story I’ll share soon.

mismatched PRESSED BACK chairs

Here’s the darker pressed back–with its mate.  It’s actually in pretty good condition, with exception to the busted out caning.

Catherine

mismatched PRESSED BACK chairs

Read Full Post »