Feeds:
Posts
Comments

Posts Tagged ‘antique ceiling tin’

It’s only 5 and 8 weeks

till my 2 fall shows happen!

The only 2 I’m participating in this year.

Vintage Market at the Vineyard!

 

Nellie's Barn Sale!

 

And I am  SO B U S Y  building things for both!

There are several shelf designs I’m working on—below is one I built last minute for last year’s Nellie’s Barn Sale—it sold immediately!  Since I have enough material for 2 more, I thought I’d make at least one.  I’ll have enough time to make another for the 2nd show if it sells!

Tin Over-Mantle styled shelf

all kinds of TIN

This is the one I just constructed—it just needs “finishing!”

I made it from leftover scraps of old projects AND from my nephew’s old dresser.  The tin was a flea market-find bought for a now abandoned project.

Tin Over-Mantle styled shelf

Any suggestions on the paint color, the finish?  I’m all ears!

Catherine

Advertisements

Read Full Post »

. . . just one of those current projects. . .

More details soon, I promise!  But I’ll put pics on insatgram as I go~

Catherine

*Have I become a tin-monger~?

one of my current projects~

Call this a dress rehearsal for the over-mantel shelf design I intend to build above mom’s cook-top. . . the kitchen project that has unfortunately not yet launched.  *I have more materials so I was willing to sacrifice some for this!

one of my current projects~

Read Full Post »

I got super lucky to see this ad on Craigslist

& get there 1st!

I’m usually like 5 minutes too late.

Craigslist ceiling tin!

Now~several sheets were pretty ROUGH but I happily took them anyway—I just knew they could be salvaged!  AND~those were the sheets I started with!

I took a rubber mallet and pounded the sheet “flat.”  Then cut off the GOOD row of 4 squares.  I did NOT toss out the cut off~it’ll be used in another project~wait & see!  ; D

pretty rough~but still worthwhile!

THIS is my newest tool!  An angle grinder!  I’ve wanted one for a while, but I’m pragmatic and only buy as I actually have need.  It cut through that tin like a hot knife through butter!  And I came away INJURY-FREE!

Worth its weight in gold for THAT alone, right?

My newest tool--the angle grinder!

Pretty rough~but still worthwhile! And DON'T through away the scraps!

building the box~Next job was to rip wood and build a box.  Noticing they tend to be very heavy, I thought it prudent to only create a solid bottom ~and framed sides.

That done, I headed back to my cut tin to try wrapping and securing around the frame.  A little trial & err here.

I found it actually harder and really awkward to bend around the frame, so I REgrouped and tried bending and pounding the tin around the edge of the table, THEN went back to wrap the box.  Bingo!

the 1st part of my Ceiling Tin Boxes!

So here’s a tin box.  Whoopie-doo.

Looks like every other tin box I’ve seen flea marketing ordinary.

I like to be different!  And I like things with at least a LITTLE BIT of refinement! So I added a cap.  It also cleaned up the top edge which was bothering me.  I used Maple bull nose molding scraps I had from casing the doors and windows in the house.  AND I stained it—better!

adding a cap~

It still felt like it needed something -I consulted with my bf who agreed- so I dug through my stashes of small feet—and THAT made all the difference!

-adding feet!

MY version of a chippy-rusty-crusty tin box!

Yep.

THIS

is MY version of

chippy, rusty, crusty!

The refined kind!
You can see the progress of a 2nd, and I’ll begin working on a couple of troughs too!
As for those scraps. . . .

Catherine

MY version of a chippy-rusty-crusty tin box!

Read Full Post »