Feeds:
Posts
Comments

Posts Tagged ‘altering a deep table’

the HALL TABLEVery simple in style but LARGE.
Too large for the average

hall table,

foyer table,

or as a sofa table.

Or should I say it’s

TOO deep…?

Well THAT’s easily remedied! I took it apart and cut out the center 5½”—20″d to 14½”.

The table suffered while being stored in a basement—the center joint split open and swelled outward very subtly.  Not obvious until running it through the table saw.  I set the fence to keep/maintain 7¼” on each “half,” but the same split still shows in the center.

I toyed with forcing the halves back together with a clamp and screwing a cleat underneath to hold them tightly together, but I actually don’t mind the split now. Call it CHARACTER!

the HALL TABLE~correction

the HALL TABLE~correction

the HALL TABLE~correction

the HALL TABLE~correction

Now a more reasonable depth to use as a sofa table~which is more likely to be it’s new use!  AND you see I stripped that chocolaty paint off the top and left the raw wood exposed only waxing it.

the HALL TABLE~correction

The wood glows now with hydration

and feels baby-butt smooth all waxed and ready for the estate sale!

Catherine

a very SIMPLE makeover!

Advertisements

Read Full Post »