Feeds:
Posts
Comments

Posts Tagged ‘3 pairs of corbels–3 shelves’

I just need a minute~e s,  I sort of abandoned blogging for a while last year.

I needed a FEW minutes.

My bad.

 

Just like on the computer– I needed to hit the REfresh button.

But that’s not to say I wasn’t working on projects.  Oh, I was.

I had a  L O T  of project ideas, and I’d be selling in 2 Fall shows.   BUT—  I knew the summer would be consumed by yard and garden repair.  And I started focusing on myself & hitting the gym hard.  A N D, of course, there was FAMILY TIME.  Seemed like EVERY. thing. was a full time proposition.

I just showed you the wall cabinet that was created because of orphaned desk drawers.  I actually made a variety of wall hanging things.  -Shelves.

I still had some very plain-Jane ReStore corbels.  I bought all 6 they had and parked on them forEVER before I came up with the first project.  But each time, I found I had to cut a bit off—and I kept themYou never know

3 corbel pairs became 3 shelves.

And the cut offs became another shelf!

The 1st pair of corbels were used to create an Over Mantle Shelf.

I backed it with 3 of the many fleur-de-lis tins I bought in a flea market.

the 1st pair of corbels--

The Over Mantle Shelf sold so quick & easy at Nellie’s Barn Sale 2016,

I decided to make a 2nd shelf for the 2017 show too.

6 ReStore corbels used for 3 shelves

There’s a place I go by with regularity that tosses out some out-of-the-ordinary pallets—I now stalk them!  The 3rd shelf was made from the boards of one their pallets.  I liked the mixed woods and only sanded, then finished with a clear-coated.  You can see I ripped trim pieces on the table saw for extra detail.  It too, was a quick sale!

6 ReStore corbels used for 3 shelves

I now had 6 corbel cut offs, which got me thinking. . .

how about stretching them out for a  L O N G  plate rail?

* The long boards were also pallets from that place!

a 5ft long plate rail with the cut offs

5ft long, with a routed groove to catch the standing plates.

a 5ft long plate rail

That shelf above the plate rail was made from salvaged parts of a vintage sewing machine cabinet.  I made 2 like that!

salvaged sewing machine shelves

I only had the decorative door for the one below.

I made the sides and used part of a drawer face for the top.

salvaged sewing machine shelves

I like making shelves, they’re fun and easy!

And speaking of corbels and pallets

I know most of you only look at and use the top pallet boards, but look again at the thick “foot” boards.  They’re usually 2″ to 3″ thick— and thick wood is expensive to buy.

I bought this amazing and adorable pair of corbels in a church flea market.  I’ve been hoarding them because, well— they’re too cute to give up!    And then I noticed they were roughly the same size as the pallet FEET,

so look what I did!

It was not easy pulling the nails, but once clear, I traced out the shape of the corbels and cut them at the band saw.  I got all of these from 1 pallet foot! 

Wouldn’t they be awesome under a plate rail/chair rail in a room?

THICK pallet "feet"

corbels in a chair rail/plate rail

And one last PALLET FOOT project–

I played with the spacing of my last 5 votive candles, then cut the pallet FOOT board to length.  I drilled the holes with a 1½” mortising bit at the drill press.  Sanded smooth, then Lyme-waxed.  I LUV IT!

Catherine

I told you I was busy working!

made from the FOOT board under a pallet

Read Full Post »