a new beginning

Step 1- mom’s move downstairs.

The focus was all about getting her settled into, and moving around safely in her new 1st flr spaces.  She’s pretty shaky, and I worried about all the obstacles of the furniture-shuffle, and purging of drawers & closets to fit in the smaller spaces.  Putting anything together for myself would have to wait, so I’d just have to deal with the absolute CHA-OS until further notice….ugh.

Step 2- My turn!
Let the Games Begin!

Although I LUV the upholstered & caned bed I made for the guest bedroom I’d been using, I longed to use ONE of the beds I’ve collected and REworked just sitting in storage!  I could totally visualize a fresh room design with each- but THEN I saw this AWEsome bed from Perigold!
I knew exACTly the direction I was taking!

Ooooof!  Can you believe the price?!?
Time for a “Sensible Chic” version!

 

 

My project starts with the most aMAZing bed
found on fb marketplace
last summer!

I popped the panel back in the footboard, but the bottom rail that holds it in is missing.  That’s okay- I only wanted to use the headboard right now anyway.

Here’s the beginning- sleeping on the floor.
The bed downstairs was incredibly high, so this was weird-weird-weird!

The first change!  Still on the floor, but it was feeling better!
I also added a 100yo door I split in half as “shutters.”
And THAT’s a story I’ll come back to later!

Being frugal –cough-cough, CHEAP!
I shopped sales, used a 40% coupon, and still got what I wanted.
$55 for padding, batting, and linen!

The bed box/frame

I bought and cut down pine boards to build a simple box frame to 54″×80″.
I ripped some of the cutoffs down to create cleats & rails to screw to the inside bed box/frame to support the box spring & mattress.

I sanded and spray painted everything with the RustOleum Metallic Rust.
I discovered by accident that it can mimic stained wood, and the Metallic Rust mimics Mahogany.  I hauled all the parts inside-upstairs to assemble.
Just one more of those UMPteen million trips up&down the stairs.
I screwed the decorative legs to the end corners (only had 2 legs) and cut the 2×2 dowel to create hidden legs at the head of the bed frame.
The newly upholstered headboard is actually hung a little higher on the wall,
so the bed itself is a separate piece.

 

I rescued the legs from a wingbacked chair thrown out for garbage!  (then I threw the remains out too!)

And lest you should forget the inspirational bed—

I like mine better!

 

All in for $158.66!

Can you believe?!?

And this is just the beginning!
Catherine

Read Full Post »

I squeezed in a dresser project!

I stumbled onto this “pretty” dresser for cheap,

then took a much needed, relaxing drive to a very small, out-of-the-way town to go get it!

An awesome drive with some aMAZing old homes along the way—I’d love to make the drive again just to take lots of photos!

Anyway- I bought the dresser.  Sure, I knew it had some obvious issues, but nothing I couldn’t handle, and the owners rapidly loaded it up for me.  When I was home and off-loading it I finally started to see other problems.
Oh boy.

The biggest problem-
a completely broken,
poorly “repaired,”
(& totally concealed) front left leg.  And remember the front is a big curve!

Okay- this is not so much a problem for MY skills as much as, with mom’s full-time cancer care—I just don’t have much time for this.  I just wanted a FUN-EASY project to work on when I can find bits of time.
So -g r e a t- let the fUn begin.

I started with all the veneer problems, and then pondered on that broken leg.  At first I was hoping to clean out the terrible “repair” job and fill it with bondo.  It never set up with enough stability, and I’d NEVER put my name on that kind of work, so after a LOT of wasted time & materials- I ended up cutting away all the damage and just REbuilding it.

*Sorry- no pics to share.  But- I used scrap wood I keep on hand, figured the angles of the straight side to the curved front, glued & nailed in place, let it fully set up—then fine-tuned/shaped with coarse sandpaper in a belt sander.  Now it is  S O L I D.

I also stripped the top and discovered issues hidden under the SUPER DARK over stain job someone gave it at some point.  Looks like it was overly sanded in a few areas, but it REstained nicely and looks beautiful now!

I waxed the top instead of clear coating it—I just think it brings out the richness in the wood more and is softer to the touch!  But that’s just my preference!
OH!  And I heat-set the wax before the final buffing.  The wax becomes a harder, more long-lasting, durable finish. 

Next- I taped off and covered and protected the top, then painted the body with a spongy weenie-roller—about 7 very thin coats.  Left side, right side, front, left side, right side, front, left side, right side………
Each thin coat dries so quickly and all those thin roller-coats finish more like a sprayed piece.
*Hint- I don’t have a sprayer.

Once completely painted–it had several days to set up before I could come back to it.  Actually, it was probably a week later (hospital schedules and all).  I had planned a decoupaged face and the time-lag gave me lots of time to plan the finished look.  AND figure out some other more appropriate hardware.

I was looking through ig and this caught my eye—it reminded me of a poster in my stashes!  That’s how my plan came to be. . . with a few adjustments.  

I measured off, taped my poster to the dresser face, then used a sharp Exacto to cut each drawer section free.  I was careful to save each face-frame part since I still wasn’t sure if I’d use it or not (I did in the end).  A pencil gave quick registration marks for placement to keep everything aligned.
Working from the top down, I pulled each drawer(s) out as I worked on it.  It let me double-check the alignment because 1) paper stretches when it’s wet, and 2) I was already messing with each section by my personal method of “distressing!”

–

–

Yes!  I wad it up
into an abusive ball.
Yes, it gets torn some!
It’s all part of that
“aging” process!

Then I smooth it out gently by hand, apply a really good wallpaper paste and REapply to the drawer face.
I prefer to smooth it out and position it with my hands at first, THEN use a flex-plastic scraper to gently smooth it out, pushing out the excess paste, and finally, wipe it down with a damp rag making sure the edges are well affixed.

Here’s my poster (from Hobby Lobby).

Working on the last drawer-

And then I decided it really did need the slight face frame cross sections after all.
You can also see I added my selection of vintage hardware right away!
SO much better!

*I filled former hardware holes and REdrilled before painting.  I poked through the paper with an awl to reveal the new hardware placement.

Now you can see how the poster was NOT large enough to cover the face,
but I had a plan!  I taped it out to expand the size with a “frame.”
But that wasn’t all.
I used a liquid gold leafing pen to freehand outline the very outer frame edge.
Irregular on the inside edge–crisp on the outside edge.
I just like that subtle contradiction!

I guess I forgot to tell you how I lightly sanded all the wallpapered edges, huh?
In hindsight, I wish I had widened the “frame’s” sides.  Oh, well. . . .

This project was completed in drips & drabs of time.
I bought it May 18th and finally finished it on the 29th.
I loaded it in the car right away and it went to the antique mall the next day where I spent hours REsetting my space to accommodate it!  WoW- my space had become a neglected disaster area!  And guess what?

It sold right away!

Awesome!

But my space is a disaster once again for the new void.
So I found another dresser to work on.  Stay tuned.
Catherine

Not an antique-
not even vintage-
just  O L D.
But pretty now!

-my next dresser-

Read Full Post »

Captain America!

In no particular order,

from all I listed at the end of my last post. . .

 

July 09

I saw this dresser on one of the facebook shopify pages.

It was during one of those little unexpected lulls.  A quick, FUN project to play with!

Structurally, it was good, but it needed some REstyling.  BADLY.

The plan

It was pretty clean, but OMG did it STINK like an ashtray!

 

*If anyone knows a miracle cure for ashtray stink, please, I’m all ears!

I washed it inside and out with white vinegar and left it out in the hot sun for days—it STILL stunk.  In the end, I painted the inside drawers~only an 80% cure.

Up on saw horses, I added blocking to the bottom corners so I could add wheels. It’s a fun touch, AND helps me move it in around easier!  ; D

A N D- I found this Marvels comic reproduction poster.  I thought it would be a really fun addition to the 60’s bow-fronted dresser style.

But 1st~ let’s strip and REstain the top!

I mixed paint to match the border of the poster—because it didn’t completely cover the dresser face.  Plus, the wood was marred in several areas and would’ve required more work than was worth the trouble  ~considering a REsale price.

And here’s the end result!

Fun & Playful!

Catherine

 

 

N e x t . . !

 

Read Full Post »